Culvert Installation in Granbury, TX
If water crosses your driveway or sits where you need to drive, a culvert gives it a path underneath. We install culverts for driveways and ditches on residential and rural properties.
Culvert Installation for Driveways & Drainage
A culvert lets water pass under your driveway or across a low spot instead of washing out the road you depend on. We handle driveway culvert installation, culvert pipe installation and box culvert installation, setting each one at the right grade with solid backfill so it drains and stays put. Drainage culverts for ditches and low areas are part of the same service. We'll look at how water actually moves across your property before we recommend placement.
A driveway that crosses a bar ditch or a wet-weather draw needs a culvert that's sized and set correctly, or the first big rain washes out the approach. We install driveway culverts, culvert pipe and box culverts across Granbury and Hood County, with proper bedding and cover so they hold up to truck traffic. If your drive meets a county road or a state highway like US-377 or SH-144, the road owner has rules for how the pipe goes in. We work through that with you before we set it.
Services include
- Driveway Culvert Installation
- Culvert Pipe Installation
- Box Culvert Installation
- Drainage Culvert Installation
See the Work in Motion
Swipe or tap the arrows to see more clips.
From First Call to Free Estimate
- 1
Tell Us About Your Property
Call, text or fill out the form. Tell us where the property is, a rough idea of its size, and what you want it to look like when we're done.
- 2
We Look It Over
Depending on the project, we may look over your property using aerial and parcel maps first, and we'll set up a visit when the work calls for it.
- 3
Get a Free, Straight Estimate
From there, you get a free estimate and a straight answer on what it takes, even if that answer is "less than you thought."
How much does it cost to install a driveway culvert?
Culvert installation cost depends on the pipe length and diameter, the pipe material and how much digging and backfill the site needs. A driveway culvert that ties into a county road ditch may also need to meet county requirements, so check with your county before work begins. We'll look at your site, recommend placement and give you a free estimate.
Do I need a permit to put in a driveway culvert in Hood County?
It depends on who owns the road your driveway meets. A culvert entirely on your own property, under a private drive, usually doesn't need a permit. Where your drive ties into a Hood County road, the county controls that right-of-way, so check with the county before new pipe goes in. Where it meets a state highway like US-377, SH-144 or one of the FM roads, TxDOT requires a driveway permit and has its own design standards, including sloped safety ends on the pipe. We'll help you figure out which rules apply before we dig.
How do I get started?
Call, text, or use the estimate form with your name and phone number. If you have the property location, photos, or more details handy, send those too, but they are not required to start the conversation.
Do you provide free estimates?
Yes. We review the property and the work you have in mind, then give you a straight estimate with the scope explained before scheduling.
Culvert Installation Around Granbury
We're based in Granbury and serve properties within about an hour to an hour and a half.
More Ways We Help
Most properties need more than one thing. Tell us the whole picture at your estimate, and we'll plan the work in the order that makes sense.
Ready to Clear Your Land?
Whether it's overgrown acreage, a pasture that needs mowing or a driveway that washes out every rain, we'll give you an honest assessment and a fair price. Every estimate is free, and we cover Granbury and the surrounding area within about an hour and a half.